manualshive.com logo in svg

Freescale Semiconductor MPC5553, Reference Manual

The Freescale Semiconductor MPC5553 is a powerful microcontroller designed for automotive and industrial applications. For detailed information on how to use this product, download the Reference Manual for free from 88.208.23.73:8080. This manual provides all the necessary information to optimize the performance of your MPC5553.

Share
Download
background image

MPC5553/MPC5554 Microcontroller Reference Manual, Rev. 5

2-40

Freescale Semiconductor

 

2.3.3.0.12

External Data / Ethernet Transmit Enable / Calibration Data / GPIO

 

DATA[26]_FEC_TX_EN_CAL_DATA[10]_GPIO[54]

DATA[26]_FEC_TX_EN_CAL_DATA[10]_GPIO[54] has the external data bus as the primary signal 
function. The FEC transmit enable signal is the first alternate function, and the calibration data function is 
the second alternate function. This pin can also be used as a GPIO signal. The FEC and calibration signals 
are mapped to the same ball, therefore either the FEC or calibration function can be used, but not both. The 
FEC and calibration functions are not available on the MPC5554. This pin can be used as a GPIO signal.

2.3.3.0.13

External Data / Ethernet Transmit Data / Calibration Data / GPIO 
DATA[27]_FEC_TXD[2]_CAL_DATA[11]_GPIO[55]

DATA[27]_FEC_TXD[2]_CAL_DATA[11]_GPIO[55] has the external data bus as the primary signal 
function. The FEC transmit data signal is the first alternate function, and the calibration data function is 
the second alternate function. This pin can also be used as a GPIO signal. The FEC and calibration signals 
are mapped to the same ball, therefore either the FEC or calibration function can be used, but not both. The 
FEC and calibration functions are not available on the MPC5554. This pin can be used as a GPIO signal.

2.3.3.0.14

External Data / Ethernet Transmit Data / Calibration Data / GPIO 
DATA[28]_FEC_TXD[1]_CAL_DATA[12]_GPIO[56]

DATA[28]_FEC_TXD[1]_CAL_DATA[12]_GPIO[56] has the external data bus as the primary signal 
function. The FEC transmit data signal is the first alternate function, and the calibration data function is 
the second alternate function. This pin can also be used as a GPIO signal. The FEC and calibration signals 
are mapped to the same ball, therefore either the FEC or calibration function can be used, but not both. The 
FEC and calibration functions are not available on the MPC5554. This pin can be used as a GPIO signal.

2.3.3.0.15

External Data / Ethernet Receive Data / Calibration Data / GPIO

 

DATA[29]_FEC_RXD[1]_CAL_DATA[13]_GPIO[57]

DATA[29]_FEC_RXD[1]_CAL_DATA[13]_GPIO[57] has the external data bus as the primary signal 
function. The FEC receive data signal is the first alternate function, and the calibration data function is the 
second alternate function. This pin can also be used as a GPIO signal. The FEC and calibration signals are 
mapped to the same ball, therefore either the FEC or calibration function can be used, but not both. The 
FEC and calibration functions are not available on the MPC5554. This pin can be used as a GPIO signal.

2.3.3.0.16

External Data / Ethernet Receive Data / Calibration Data / GPIO
DATA[30]_FEC_RXD[2]_CAL_DATA[14]_GPIO[58]

DATA[30]_FEC_RXD[2]_CAL_DATA[14]_GPIO[58] has the external data bus as the primary signal 
function. The FEC receive data signal is the first alternate function, and the calibration data function is the 
second alternate function. The FEC and calibration signals are mapped to the same ball, therefore either 
the FEC or calibration function can be used, but not both. The FEC and calibration functions are not 
available on the MPC5554. This pin can be used as a GPIO signal. 

2.3.3.0.17

External Data / Ethernet Receive Data / Calibration Data / GPIO

 

DATA[31]_FEC_RXD[3]_CAL_DATA[15]_GPIO[59]

DATA[31]_FEC_RXD[3]_CAL_DATA[15]_GPIO[59] has the external data bus as the primary signal 
function. The FEC receive data signal is the first alternate function, and the calibration data function is the 
second alternate function. This pin can also be used as a GPIO signal. The FEC and calibration signals are 

Summary of Contents for MPC5553

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MPC5553

UCS CAT Quick Start Manual preview
CAT
Brand: UCS Pages: 4
Velleman KA01 Manual preview
KA01
Brand: Velleman Pages: 12
ZPA Pecky, a.s. 52 442 Mounting Instructions preview
52 442
Brand: ZPA Pecky, a.s. Pages: 36
M-Elec ML-2820-US3 Quick Start Manual preview
ML-2820-US3
Brand: M-Elec Pages: 2
ACT ACTPRO PRODUCT RANGE Operating & Installation Instructions Manual preview
ACTPRO PRODUCT RANGE
Brand: ACT Pages: 8
OBO Bettermann C50-0-255 Installation Instructions Manual preview
C50-0-255
Brand: OBO Bettermann Pages: 6
SAMES KREMLIN LP 6 - 0.5/4 Translation From The Original Manual preview
LP 6 - 0.5/4
Brand: SAMES KREMLIN Pages: 5
NEC V850E/RS1 User Manual preview
V850E/RS1
Brand: NEC Pages: 852
W.E.ST. PQ-132-U Technical Documentation Manual preview
PQ-132-U
Brand: W.E.ST. Pages: 34
Madas RG/2MBLZ DN 80 Technical Manual preview
RG/2MBLZ DN 80
Brand: Madas Pages: 48
jbc KNE Instruction Manual preview
KNE
Brand: jbc Pages: 8
Trio MC206X Quick Connection Manual preview
MC206X
Brand: Trio Pages: 8
GreenFlux T2235-02 Installation Manual preview
T2235-02
Brand: GreenFlux Pages: 35
Balmar Max Charge MC-614-H Installation And Operation Manual preview
Max Charge MC-614-H
Brand: Balmar Pages: 20
Fego Precision Industrial TP48 Instructions preview
TP48
Brand: Fego Precision Industrial Pages: 2
Dontek V7-RTS Instructions Manual preview
V7-RTS
Brand: Dontek Pages: 10
Artecta Domotion DLC-4 RGBW Instruction Manual preview
Domotion DLC-4 RGBW
Brand: Artecta Pages: 12
Atmel AVR1925 XMEGA-C3 Xplained User Manual preview
AVR1925 XMEGA-C3 Xplained
Brand: Atmel Pages: 16

Brands by name

Popular brands

Load more brands