3
1
4
2
1. Locate the quick release lever. Open the lever and
remove the thumb nut and cone spring (opposite
the lever).
2. Line up the fork with the axle at the center of the
wheel. Make sure there's a spacer between the fork
and wheel on each side.The disc brake is on the le�.
3. Hold the nut on one side and �ghten the nut on
the other side of the wheel onto the fork.
4. Ensure the front wheel and quick release lever
are properly secured before moving on to the next
step.
DO NOT
press the brake levers un�l the front wheel is fully installed,
otherwise the liquid will leak out of the brake, making the front brake
unusable!
Front Wheel Assembly
WARNING
5
