22
23
Content
Product overview
Content of package
3
Headset Fox FX 810 DECT
3
Base station Fox FX 810 DECT
4
Installation
Fastening the headband to the headset
23
Connection to a desk phone
Desk phone without headset connection
23
Desk phone with handset lifter
23
Desk phone with headset connection
24
Connection to an EHS-enabled phone
24
Power supply
24
Headset operation
Switching on / off
25
Logging the headset onto the base station
25
Configuring the audio link to the desk phone
25
Setting the dial tone
25
Setting the microphone level
26
Call acceptance
26
Volume control
26
Mute microphone (function table)
26
Switching from the desk phone to the headset
26
Switching from the headset to the desk phone
27
Enabling the DHSG mode
27
Enabling RHL mode
27
Logging on a secondary headset
27
Holding a conference call
27
Terminating and leaving an active conference
28
Logging off from the master base station
28
Technical data
Headset Fox FX 810 DECT
28
Base station Fox FX 810 DECT
29
Disposing of the product
29
E
Installation
Fastening the headband to the headset
1 Assemble the headset and the headband as shown
and press together until you hear a «click».
2 Turn the microphone into the desired position for use
on the left or right ear.
3 Adjust the length of the headband so that the head-
set rests easily and comfortably on your head.
Connection to a desk phone
Desk phone without headset connection
This phone model has no separate headset socket.
1 Unplug the handset’s cable from the socket of your desk phone.
2 Plug the handset’s cable into the socket marked with the handset symbol on the base station.
3 Plug the enclosed phone lead into the socket marked with the phone symbol on the base station.
4 Connect the other end of the phone lead to the handset socket on your desk phone.
Desk phone with handset lifter
A lifter raises the desk phone’s handset mechanically to make or take a call. Please consult the
lifter’s documentation for instructions on its installation.
E
1
2
3
