46
Space required by FreezyBoy
®
with raiser
Width: 18 cm (17.0 cm plus 1 cm)
Depth: 42 cm (37.0 cm plus 5 cm)
Height: 40.5 cm
Space required by FreezyBoy
®
without raiser
Width: 18 cm (17.0 cm plus 1 cm)
Depth: 42 cm (37.0 cm plus 5 cm)
Height: 37.5 cm
Setup instructions
1. Remove all parts from the drawer pull-out and
clean it.
2. Extend the pull-out as far as you can.
3. Check the height of your waste bin if you are
planning to fit FreezyBoy
®
beside it. If your
waste bin is higher than FreezyBoy
®
, you can
use the raiser supplied with your new appliance.
4.a)
If using raiser:
Place the raiser on the base of
the pull-out, 9.5 cm to the right of the centre of
the front panel.
Position it so that the short end with the tab
touches the front panel. Screw in the raiser.
b)
If not using raiser:
Position the mounting
plate on the base of the pull-out, 9.5 cm to the
right of the centre of the front panel. Position it
so that one of the long ends touches the front
panel. Screw in the mounting plate.
5. Place FreezyBoy
®
on the floor next to
the pull-out.
15.4
18
40.
5
3.
7
18
37.
5
42
42
9.5
9.5
Summary of Contents for 5300100020
