freightliner NEW CASCADIA 2016 Driver Manual Download

Page: 171 / 207

Cab Washing and Polishing

IMPORTANT: Carefully read all instructions be-
fore using or applying any cleaner or product on
the vehicle or components. Failure to follow
manufacturers’ recommendations can result in
damage to the finish.

WARNING

Do not power wash or steam clean the engine
bay in the area of vehicle electrical components,
unless specified by vehicle manuals or service
literature. Power washing and steam cleaning can
cause corrosion, permanently damaging these
components, which could result in fire, personal
injury, or property damage.

To protect the finish of your new vehicle, follow these
guidelines carefully.

•

During the first 30 days, rinse your vehicle fre-
quently with water. If the vehicle is dirty, use a
mild liquid soap. Do not use detergent.

•

During the first 30 days, do not use anything
abrasive on your vehicle. Brushes, chemicals,
and cleaners may scratch the finish.

•

During the first 120 days, do not wax your
vehicle.

To extend the life of your vehicle’s finish, follow these
guidelines.

•

Avoid washing your vehicle in the hot sun.

•

Always use water. After the cab is completely
washed, dry it with a towel or chamois.

•

Do not dust painted surfaces with a dry cloth,
as this will scratch the paint.

•

Do not remove ice or snow from a painted sur-
face with a scraper of any sort.

•

To prevent damage to the finish, wax it regu-
larly. Before waxing, if the finish has become
dull, remove oxidized paint using a cleaner
specifically designed for this purpose. Remove
all road tar and tree sap before waxing.
Freightliner recommends that a quality brand of
cleaner or cleaner-polish and polishing wax be
used.

•

Do not let diesel fuel or antifreeze stand on a
painted surface. If either should occur, rinse
the surface off with water.

•

To prevent rust, have any nicks or other dam-
age on the finish touched up as soon as pos-
sible.

•

Park your vehicle in a sheltered area whenever
possible.

To prevent delamination and deterioration of labels
and stickers on the cab, follow these guidlines care-
fully:

•

Do not pressure wash the label or sticker or
surfaces near it.

•

Do not use strong alkaline soaps on or near
the label or sticker.

Care of Fiberglass Parts

Wash unpainted fiberglass air fairings and shields
monthly with a mild detergent, such as dishwashing
liquid. Avoid strong alkaline cleansers.

Apply a wax specifically designed for fiberglass.

Care of Chrome Parts

To prevent rust, keep chrome parts clean and pro-
tected at all times. This is especially important during
winter driving and in coastal areas where there is
exposure to salt air.

When cleaning chrome parts, use clean water and a
soft cloth or sponge. A mild detergent may also be
used.

Sponge gently, then rinse. If necessary, use a non-
abrasive chrome cleaner to remove stubborn rust or
other material. Do not use steel wool.

To help protect the chrome after cleaning, apply a
coat of polishing wax to the surface. Never use wax
on parts that are exposed to high heat, such as ex-
haust pipes.

Care of Exterior Lights

Clean the headlight lenses by hand only, using a
flannel cloth with mild, non-caustic soap or detergent,
and water.

NOTICE

Do not use a power buffer, paper towels, chemi-
cal solvents, or abrasive cleaners on the head-
light lens, all of which can remove the UV coating
from the surface, and result in yellowing of the
lens.

Vehicle Appearance and Care

21.1