this switch the status of On is indicated by a lighted
bar at the top of the icon.
When intelligent high-beam headlights are on, the
high-beam headlights will switch to low-beam
headlights when a vehicle approaches from the
opposite direction. They will switch back to high-
beam headlights when no vehicles are approaching
from the opposite direction.
The intelligent headlights can also be controlled by
using the headlight switch and turn signal lever; see
Driver Controls for more information.
Touching the courtesy lighting icon will open a popup
showing the current lighting duration and allowing the
lighting duration to be adjusted.
Exterior lighting controlled by the rotary dial cannot
be controlled through the exterior light screen.
Interior Lighting
The interior lighting menu shows an image of an
interior of a eCascadia cab. The digital switches for
interior lighting allow for the control of overhead, foot
well, and sleeper lights.
Touching any of the light icons on the screen will
lights up the digital switch, activate the lights on the
interior image of the truck, and turn on those lights in
the truck itself.
All interior lights can be dimmed using the slider next
to the light icon.
All available lights in the cab can be turned off and
on by touching the Off button.
Entrance lighting can be controlled by the settings
icon. Touching the settings icon will open a popup
window where the entrance lighting can be toggled
off or on and entrance light timing controls can be
accessed. Choosing entrance light timing will be
open a slider that allows modification of the length of
time the entrance light is on.
Settings
The settings menu allows you to choose system
features such as display language, units of
measurement, and sound levels.
Tap on the settings (gear) icon in the lower left hand
corner of the infotainment screen to access Settings.
Settings can also be accessed under the Cab menu.
NOTE: Settings options will change based on
the features installed on the vehicle.
Settings: Language
Language options currently include English
(American), Francçais (Canadian), and Español
(Mexican).
Settings: Units
NOTE: Setting a Distance unit to either imperial
(miles) or metric (kilometers) will auto-populate
the Consumption to the same system of
measurement.
Units refers to units of measurement and are
selected using an either/or radio buttons in each
category.
Units are set for Speed (km/h or mph), Fuel
Consumption (1/100km or mpg), and Distance
(kilometers or miles). Other units include:
•
Following Distance: either distance or time
•
Pressure: either kPa or PSI
•
Temperature: either Celsius or Fahrenheit
Settings: Brightness
Brightness levels for the instrument display,
infotainment display, and the dash can be adjusted
here using touch-screen slider controls.
Settings: Key Alert
This setting turns the audible lock alert on or off.
Settings: Display Off and On
Selecting this setting turns the display off. Touching
anywhere on the display screen turns it on again.
Settings: Controls
Controls provides the ability to change keyboards to
accommodate different languages and scripts as well
as change the sensitivity levels of touch controls.
Touch control settings include slow, medium, and
fast.
Audible system feedback controls can also be
accessed here as well as under audio settings.
Settings: Audio
Audio Settings control the volume of navigation and
traffic announcements, audible system feedback, and
phone ringtone and speech volume.
Instruments
3.18
Summary of Contents for PX113064S T 2016
