freightliner PX113064S T 2016 Manual Download

Page: 8 / 236

be applied on the interior edge of the B-pillar and the
Canada certification label will be applied on the
exterior edge as shown in

Fig. 1.4

Trucks built without a cargo body and tractors built
without a fifth wheel that are intended for service in
Canada will have an incomplete Canada vehicle
certification label attached to the left-hand B-pillar.
After completion of the vehicle, a complete Canada
certification label must be attached by the final-stage
manufacturer to certify that the vehicle conforms to
all applicable vehicle safety regulations in effect on
the date of completion.

Emissions Labels

Vehicle Emission Control Information
Label

Model year 2013 and later vehicles meet
requirements as specified by GHG14, GHG17 and
GHG21 regulations. These vehicles are equipped
with components that increase fuel efficiency and
reduce greenhouse gas (GHG) emissions.

Components may include, but are not limited to, low-
rolling resistance tires; aerodynamic devices such as
hood, cab side extenders, and fuel tank fairings;
vehicle speed limiters; and idle shutdown timers.

See

Table 1.1

and

Table 1.2

for additional

information on what EPA and GHG regulations apply
to different model years.

EPA Regulations

Regulation

Emissions Components

EPA10
(Reduction of
NOx emissions
to 0.2 g/bhp-hr)

EPA07-type ATD, with additional
selective catalyst reduction (SCR)
technology that utilizes diesel exhaust
fluid (DEF) to convert NOx to nitrogen
and water vapor.

GHG21

GHG14/17 components plus additional
components including, but not limited
to, transmissions, axles, predictive
technologies, idle reduction
technologies for vocational vehicles,
and tire pressure monitoring systems.

Table 1.1, EPA Regulations

Emission Regulations by Model Year

Model Year

Engine Regulation

Vehicle Regulation

2021–and later

EPA10, GHG21

GHG21

Table 1.2, Emission Regulations by Model Year

f080199

08/31/2020

DAIMLER TRUCKS

LLC

N.A.

07/15

52,000

23,587

110
120

120

S
S

MANUFACTURED BY:
DATE OF MFR:

GVWR PNBV LBS

GVWR PNBV KG

THIS VEHICLE COMPLIES WITH ALL
APPLICABLE FEDERAL MOTOR VEHICLE
SAFETY STANDARDS IN EFFECT AT THE DATE
OF MANUFACTURE SHOWN ABOVE.

VEHICLE ID NO:
TYPE

TRUCK TRACTOR TT CT

9999

FUJGBDV GLZZ

COUNTRY OF ORIGIN: U.S.A.

PSI

"S"

COLD

12,000

20,000

LBS

GAWR PNBE

9,072

KGS

GAWR PNBE

5,443
9,072

FRONT AXLE:

ND INT AXLE

RD INT AXLE

TH INT AXLE

REAR AXLE:

ST INT AXLE

275/80R22.5(G)
445/50R22.5(L)

445/50R22.5(L)

TIRES

22.5X8.25
22.5X14.0

22.5X14.0

RIMS

COLD

KPA

758
827

827

Fig. 1.5, FMVSS Vehicle Certification Label (complete vehicle)

f080218a

08/31/2020

CANADA CERTIFICATION

VIN/NIV:

DATE OF MFR: 01/20

XXXXXXXXXXXXXXXXX

THIS VEHICLE CONFORMS TO ALL APPLICABLE STANDARDS PRESCRIBED UNDER THE CANADIAN MOTOR VEHICLE SAFETY REGULATIONS IN
EFFECT ON THE DATE OF MANUFACTURE / CE VEHICULE EST CONFORME A TOUTES LES NORMES QUI LUI SONT APPLICABLES EN VERTU DU

REGLEMENT SUR LA SECURITE DES VEHICULES AUTOMOBILES DU CANADA EN VIGUEUR A LA DATE DE SA FABRICATION.

Fig. 1.6, Canadian Certification Label

Vehicle Identification

1.3