freightliner PX113064S T 2016 Manual Download

Page: 34 / 236

the first gauge into a different screen placement.
Removing a gauge removes the gauge from the
gauge screens. A removed gauge can be added
back by pressing the Add or plus sign button. Doing
so will cause a radio button list to appear listing the
gauges available to be added.

Gauge units of measurements are controlled under
Settings which can be accessed under the Cab
menu or by pressing the star menu icon in the lower
left corner.

Moving between gauge screens can be
accomplished by pressing the gauge screen name at
the top of the screen.

In the ICC5, if a value measured by a digital gauge
exceeds the normal range, the gauge icon, display
bar graph color, and gauge value will change color to
amber to indicate caution or red to indicate danger.
See

Fig. 3.8

Batter and eDrive Coolant Levels

There are two coolant systems on the eCascadia:
the battery coolant and the eDrive coolant. The
coolant level sensors report the coolant levels as
either full or low.

eAxle Oil Temperature Popups

The driver display will show a yellow caution window
if the gear box oil temperature is too high.

A red warning window will display on the driver
screen if the rotational direction of the oil pump is
unexpected.

Red warning windows will also display is the
operation of the oil pump is limited or not operating.

Application Air Pressure Gauge

An application air pressure gauge registers the air
pressure being used to apply the brakes. The gauge
will not register air pressure until the foot brake pedal
is depressed or the trailer brake is applied.

Suspension Air Pressure Gauge

The suspension air pressure gauge registers the air
pressure applied to the vehicle air suspension.

Trailer Application Air Pressure Gauge

The trailer application air pressure registers the
applied air pressure in the brake circuit.

Trailer Suspension Air Pressure
Gauge

The trailer suspension air pressure gauge registers
the air pressure applied to the trailer air suspension.

Base ICC5 A-Panel Gauges

Outside of the gauges screen, the ICC5 displays a
number of other digital gauges and instruments.

Battery Voltage

There are two battery systems on the eCascadia: a
low-voltage (LV) system and a high-voltage (HV)
system.

The right-hand side of the driver display screen
shows the state of charge of the HV system.

The LV charging system telltales appear in the upper
left corner of the driver display. A yellow telltale
indicates a low battery; a red telltale indicates a
dangerously low charge.

Speedometer

In the ICC5 the speedometer is shown on the left-
hand side of the driver display. The speedometer
measure miles per hour (mph) or kilometers per hour
(km/h), depending on the option selected in the
system settings.

Primary and Secondary Air Gauges

Primary and secondary air gauges are stacked at the
bottom center of the driver display. When the air
pressure drops too low, both the air pressure
measurement and the air pressure icon will change
color. A complete lack of air pressure will result in

f611764

08/07/2019

Red Gauge Icon

Red Gauge Bar Graph

Red Gauge Value

Fig. 3.8, Gauge Caution & Warning Indicator Display -

ICC5

Instruments

3.15