16
1. Clean everyday
It is recommended that you clean the equipment before and after each training. To remove dust
from the equipment, use a soft cloth to soak the following cleaning agent and then wipe all
exposed surfaces.
Note: Read and follow manufacturer's instructions, especially dilution instructions, before using any
detergent to clean fitness equipment. Do not use concentrated liquid of high concentration or any
acid cleaner directly; such cleaner will corrode the protective layer of the equipment. It is forbidden
to spray water or liquid on any parts of the equipment. Wait until the equipment is completely dry
before using it.
Frequent use of vacuum cleaner to clean the floor under the equipment can prevent dust
accumulation from affecting the operation of the equipment. Use soft nylon brush to clean grooves
and pedals.
2. Daily inspection
Check the equipment at least once a day for the following problems:
Slipping of belt
Flexibility of fasteners
Abnormal noise
Any other indication that the equipment may need to be repaired.
3. Weekly Maintenance
Weekly maintenance tasks are as follows:
(1) Use water or a cleaning agent to clean the tracks and wheels.
(2) Use a vacuum cleaner or wet mop to clean the floor under the equipment.
(3) Testing all functions of the console, including heart rate monitoring function.
6. ROUTINE MAINTENANCE
Summary of Contents for FF-UB200
Page 1: ...FF UB200 FRENCH FITNESS UB200 COMMERCIAL UPRIGHT BIKE ASSEMBLY MANUAL...
Page 10: ...10 Step 2 Assemble screen connect communication tight all screws Communication line connection...
Page 12: ...12 Step 4 Assemble bottle holder and handle protector tight all screws...
Page 18: ...18 7 INTEGRAL EXPLOSION CHART OF INSTRUMENTS AND SPARE PARTS LIST...