33
7.
ELECTRICAL CONNECTION
7.1.
Connecting the unit to the power supply
Unit connection to the to the power supply must be carried out only by qualified
personnel.
Note the following before connecting the unit:
•
Applicable local electrical safety regulations.
•
The power supply voltage and frequency must match the specifications on the
technical data sticker.
•
Do not connect a damaged unit or damaged parts (such as electrical cables) to
the power supply.
•
Only connect the unit to a mains circuit with protective grounding.
•
Do not use extension cords or multiple socket strips.
8.
DRAINAGE
8.1.
Drainage system
Multideck Jupiter to be equipped with suitable drainage system. The condensate can
be drained to the tub trough the drainage siphon.
Also, condensate drainage can be connected to the common sewerage system.
Drainage connection points are indicated in the furniture layouts. It is necessary to
check the condensate collection tub to prevent it from the entry of food remains,
sand or larger dust particles.
Summary of Contents for JUPITER H8
