4.
Press
to go down to set the time: press
or
to switch from one parameter to another
and press
to adjust the value of the selected parameter.
5.
Press
(
) to validate the settings. Pump returns to the infusion programming screen.
NOTE:
If 12 h format is selected, AM or PM choice must be done.
On this screen, the date is 01/01/2020, the time format is 24 h and the time is 00:00,
which are factory configuration.
6.5.3 Delayed start
This function enables to postpone start of a new infusion.
INFORMATION
■
The delayed start duration can be adjusted from 1 minute to 24 hours with
a step of 1 minute or 1 hour.
■
Delayed start duration is included in the infusion remaining time.
■
During an infusion, modify the delayed start settings from menu confirguring
screen will reset the infusion progress.
1.
Under basic settings menu screen (see
on page 51 to access), select the
delayed start menu
and press
(
) to enter.
55
