NOTE:
In a configuring screen, when the function is activated, the related settings can be
selected. The selected value is displayed in blue background.
6.4 Infusion mode
Ambix nova pump propose 4 infusion modes:
■
Flow rate only mode (symbol:
)
■
Continuous mode (symbol:
)
■
Ramp mode (symbol:
)
■
Intermittent mode (symbol:
)
6.4.1 Select the infusion mode
When the pump is switched on, the infusion programming screen is displayed with the last
settings or presets (as example below in continues mode).
For programming with the infusion mode displayed (for example, continuous mode), see
Programming the infusion settings
on page 32.
For programming with a different infusion mode (for example, ramp mode), following below
steps:
1.
Press
key to enter main menu screen.
2.
Press
(
) key to enter the infusion mode selection menu.
44
