CF250V-400V • 2013-1
Test operation
Chapter 6
If proportional sensors or an internal humidity sensor has
been fitted as part of the installation, the symbol α will be
displayed when the humidity sensor increases the airflow.
Summer bypass
When this function has been activated, the text
“Summer bypass On” is displayed (for three sec-
onds) in the top row of the screen, alternating with
the information normally displayed in this row.
Filters
An interval can be entered for how often filter change
reminders are to be displayed. The top row of the dis-
play will then show a reminder to “Check filters”, which
indicates that the filters need cleaning or replacing.
Once this has been done, press the
and
buttons
for 5 seconds to reset the automatic message.
Acceleration
Pressing the
button activates the mode for
accelerated airflow when additional ventilation is needed.
If the option of wireless acceleration has been fit-
ted, this function can be activated via the wire-
less transmitter/acceleration switch.
If the installation includes a switching sensor which is
connected to the lighting, or if the integrated timer has
been set for periodic operation, operation will automati-
cally switch from normal mode to acceleration mode.
Pressing the
button will display a code
which indicates on which unit the accelera-
tion function has been activated.
s1 = Switch S/W1
s2 = Switch S/W2
s3 = Switch S/W3
s4 = Switch SW4
s5 = Switch SW5
LS = Controlled phase (LS)
w1-4 = Wireless remote control
6.2 START MENU
Software
The screen displays the version number for
the unit’s software for 3 seconds.
No adjustments are possible on this screen.
Language
The displays are pre-set to Swedish; other languages
may be selected. The display shows the language
which has been selected. The selected language
is normally displayed for 5 seconds but can be dis-
played for longer if you change the setting.
(If you want to select a different language, pull
the plug out of the socket and put it back in).
Control mode
This allows you to choose between the control mode
described in this document and an alternative one.
Airflow
The airflow is a percentage of the unit’s maximum flow.
Wireless remote control
Wireless remote control is automatically displayed
if a wireless acceleration switch has been fitted.
The message is usually displayed for 3 seconds.
Air humidity sensor
The Air humidity sensor screen indicates wheth-
er a humidity sensor has been fitted. The
screen usually displays for 3 seconds.
Min airflow/Normal airflow/Max airflow (Boost)
Once the start-up messages have finished, Min or
Normal is displayed plus the operating status (Min
airflow X % or Normal airflow X % or Max airflow X %).
Normally the speed of normal airflow
(ventilation) is displayed via the unit.
Number of
times button
is pressed
Function
1
30 min
2
60 min
3
Continuous
4
Return to Normal airflow
v--
Language
Swedish
Control mode
02
Airflow
%
Wireless remote control
Not fitted
Air humidity sensor
Not fitted
Normal airflow
30 %
Summer bypass On
30 %
Check filters
30 %
