Maintenance and Repair Work
A 68/73
STUN-E512_E3__EN.DOCX
www.freund-germany.com
6.3.3 Replace electrodes of stun tong
Dirty and consumed electrodes lead to poor skin contact and do not ensure
optimum stunning.
You can recognize burned electrodes by the round electrode tips. Replace
fouled and burned electrodes of the stun tongs on time
See the operating manual of the respective stun tong or the stunner
handpiece H2B for more details.
6.3.4 Replace
fuses
Fig. 6-1 Interior view of electric-
stunner
Fig. 6-2 – Fig. 6-3
Detail view of fuses
Replace defective fuses only with fuses of the same amperage.
6.4 Electrical
measurements
You need
for the current measurement a clip-on ampere meter and
for the voltage measurement a multimeter.
All measurements to live components may only be performed by approved
or qualified personnel.
Fuse 6.3 AT
Fuse 4 AT