MCC
–
Cold / Ambient
US
19/40
4.
OPERATION AND USE
The display and/or set value is not the product/unit temperature.
The units are fact
ory programmed to maintain a product temperature ≤ 41
º
F.
The set temperature can be changed from 30.2
º
F to 41
º
F.
4.1
Control Panel Cold Units
4.1.1 Control Panel
– Self-contained units
Temperature controller
1
Display
2
Up (
) and Down (
) keys
3
Escape/Stand-by key (power on)*
4
Enter key
* Switch on/off: hold for approx. 3 sec.
Switching-on the unit
•
Switch the cooling on by means of the temperature controller.
•
Let the unit cool for approx. 30 minutes.
Loading the unit
•
Only load products of which the temperature is maximum 39.2ºF.
•
The maximum loading height is 2 inch below the bottom of the shelf/air guide above.
•
The maximum carrying-capacity per shelf is 20.2 lbs/ft, by equal load.
Load only with pre-cooled products.
The unit will only maintain the product temperature.
Checking the temperature
•
During operation the display of the thermostat shows the temperature in the unit. The
maximum reading must not exceed 41ºF.
•
The indication
will light when the cooling is active.
Summary of Contents for 24-2-A
Page 37: ...MCC Cold Ambient US 37 40 Notes...
Page 38: ...MCC Cold Ambient US 38 40 Notes...
