REMOVAL AND REPLACEMENT OF PARTS
Service Manual Cold Deli CD3/4/5 form 9123583 rev.4/2015
Page 14
FRONT GRIP MAGNETS CURVED MODEL
1. Remove the screw securing the side plate
of the grip.
2. Remove the magnet holder by sliding it
outwards, a controlled knock with a ham-
mer might be necessary to remove the
magnet holder.
3. Reverse procedure to install.
Note:
the appliance has two separate sets of
magnet holders, another set is located inside
the front profile.
CURVED GLASS
1. Turn the curved glass to the top position.
2. Remove the cover plates on the mounting
profile (if necessary).
3. Loosen the adjusting screws that secure
the glass with the special torques key
TX15.
4. Remove the curved glass.
5. Remove the front grip magnets according
to prior procedure.
6. Place the new glass with the plastic pro-
tection profile.
7. Reverse the procedure to install.
Note1
: The cover plates are fixed with high
temperature resistant sealant.
Note2:
Special torques key (TX15) is supplied
with the delivery of a new curved glass.
Summary of Contents for COLD DELI CD 3 Self
