REMOVAL AND REPLACEMENT OF PARTS
Service Manual Cold Deli CD3/4/5 form 9123583 rev.4/2015
Page 18
PROTECTION PROFILE IN FRONT (BUMPER)
1. Remove the profile with a screw driver.
Slide screw driver along the length of the
profile to remove the profile.
2. Install the new bumper.
Note:
To prevent scratching a piece of cloth
could be placed between the metal of the pro-
file and the screwdriver.
SIDE PLATE LEFT AND RIGHT, FRONT SIDE
1. Remove the side glass.
2. Loosen the bolts on the bottom side that
secure the side plate and remove this plate.
3. Loosen the bolts and rivets on the front
bottom side that secure the aluminium
front and remove this front.
4. Remove the side plate.
5. Reverse the procedure to install.
Note:
when replacing the front panel, also
transfer the magnets and holders on the
inside of the panel. These can be removed
by pulling the middle outwards slightly and
sliding them out.
Summary of Contents for COLD DELI CD 3 Self
