REMOVAL AND REPLACEMENT OF PARTS
Service Manual Hot Deli HD3/4/5/7 form 9123549 rev.03/2017
Page 22
CURVED GLASS
1. Turn the curved glass to the top position.
2. Remove the cover plates on the mounting
profile (if necessary).
3. Loosen the adjusting screws that secure
the glass with the special torques key
TX15.
4. Remove the curved glass.
5. Remove the frontgrip magnets according
to prior procedure
6. Place the new glass with the plastic pro-
tection profile.
7. Reverse the procedure to install.
Note
1: The cover plates are fixed with high
temperature resistant sealant.
Note
2: Special torques key (TX15) is supplied
with the delivery of a new curved glass.
FRONT GRIP MAGNETS CURVED MODEL
1. Remove the screw securing the side plate
of the grip.
2. Remove the magnet holder by sliding it
outwards, a controlled knock with a ham-
mer might be necessary to remove the
magnet holder.
3. Reverse procedure to install
Note:
the appliance has two separate sets of
magnet holders, another set is located inside
the front profile.
Summary of Contents for HOT DELI 3
Page 2: ...Service Manual Hot Deli HD3 4 5 7 form 9123549 rev 04 2017 Page 2 TABLE OF CONTENTS EMPTY PAGE...
Page 7: ...Service Manual Hot Deli HD3 4 5 7 form 9123549 rev 04 2017 Page 7 TABLE OF CONTENTS EMPTY PAGE...
Page 122: ...Service Manual Hot Deli HD3 4 5 7 form 9123549 rev 03 2017 Page 122 EMPTY PAGE...
Page 123: ...Service Manual Hot Deli HD3 4 5 7 form 9123549 rev 03 2017 Page 123 EMPTY PAGE...
