REMOVAL AND REPLACEMENT OF PARTS
Page 11
Service Manual Hot Deli Two Tier HDTT3/4/5/7 form 9124303 rev.06/2018
1. Open the middle door with the special
key.
2. Remove the 2 bolts that secure the ther-
mostat plate and turn this plate towards
yourself.
3. Loosen the blocking clips on the sides of
the thermostat and remove the thermo-
stat.
4. Disconnect the wiring.
5. Reverse the procedure to install.
Note:
Set all parameters in the new thermo-
stat.
THERMOSTAT DANFOSS ERC 211
CERAMIC ELEMENT
1. Remove the socket head screws that se-
cure the reflector and turn the reflector
downwards.
2. Remove the wiring from all elements.
3. Remove the socket head screws and nuts
that secure the mounting plate of the
elements and lower this plate.
4. Remove the ceramic element from the
plate by sliding off the clip.
5. Reverse the procedure to install.
