Page 72
Rev.5 Service Manual MCC Hot USA 20220500
12.11
Opening Electrical box
Depending on the MCC version the electric box is placed at the back or in the front of
the unit. For drop in versions the box can be placed anywhere in the build in counter.
First remove the panel (back or front depending on version)
Panel is fixed with two screws underneath the unit. Loosen those.
In some versions you also need to loosen the screws on the side of the under storage compartment.
After loosening the screws, you can remove the panel by pulling it slightly down and then turning it
towards you.
Two lips on the top of the panel, keep the panel in place.
Depending on the version you find one
Screw on top of the electrical box,
or two screws, underneath the pull
out handle from the box.
Remove those screws.
Now you can pull the box toward you.
The box will slide in its rails
Normal version (24V psu)
Special version (15V psu)
See serial number remarks in
parts
section
