Rev.5 Service Manual MCC Hot USA 20220500
Page 73
12.12 Led light Replacement
All LED Lights are mounted in the same way.
1.
Remove side glass panes. ( Refer 7.2)
2.
Remove column cover.
(two screws, one on top backside and
one at the bottom back side)
3.
Pull off column cover.
4.
Remove screw holding the LED housing .
Column screw (top)
5.
Disconnect connector in Column, before you do so,
make a note of the placing of the red and black cable in the connector.
6.
Take LED light out of LED light holder, and place new LED.
7.
Connect the wires from the new LED in the column, taking care of the notes you
made regarding the red and black cable.
12.13 Heating element replacement
1.
Remove Shelf Glass pane (refer 11.10)
2.
Remove air box (refer 11.9).
3.
Remove side glass (refer 11.2)
4.
Remove column cover (middle left column cover, seen from back of unit).
