Installation Manual Multi Deck 60/100/120 - 3/4/5 level form 9123793 rev. 07/2015
Page 24
INSTALLATION
Operate the Multi Deck 60/100/120 at maximum temperature setting to insure the proper
working of the unit.
BEFORE FIRST USE
Each merchandiser is furnished on 4 casters of 80 mm. The Multi Deck 60 has 2 rigid casters
on the back side and 2 locking swivel casters on the customer side. The Multi Deck 100/120 is
furnished with 2 swivel casters on the back side and 2 locking swivel casters on the customer
side.
CASTERS
INSTRUCTIONS FOR OPERATORS
After installation of the Multi Deck, the operator of the unit has to be instructed.
The instruction has to cover the following subjects:
• How to switch the unit on.
• Working of the unit.
• Run through the user manual.
• How to react for information or service calls.
If a separate thermometer is ordered you can click this with the magnets under the 2 top
shelves.
In the 2 top shelves, on the left and right hand side in the front, there are 2 knock-outs of Ø
2.5 mm. Tap these small holes out with a small screwdriver and fit the thermometer with two
screws.
See also separate mounting instructions on page 18.
THERMOMETER (9229801)
