210.100-IOM (JUL 2018)
Page 4
ACUAIR
®
HYGIENIC AIR UNITS
INSTALLATION - OPERATION - MAINTENANCE
INTRODUCTION
This manual, in combination with the appropriate controls
related manuals, provides the information necessary to safely
install and start up Frick AcuAir
®
equipment. Due to the custom
nature of the AcuAir
®
products there may be areas beyond the
scope of this manual. If there are any questions about a special
application lacking the required information, please contact
the installing contractor or your local Frick Sales Office.
SAFETY
The customer is responsible for providing qualified and trained
personnel to install and operate the equipment. Consult all
local building, occupational safety, electrical, gas, and other
codes applicable to the installation.
A variety of optional safety features are available from the
manufacturer; it is the responsibility of the owner to determine
if the unit is equipped with all of the safety devices required
for the particular application.
Safety considerations include:
1. The accessibility of the equipment to non-service personnel.
2. The provision of electrical lockout switches.
3. Maintenance procedures.
4. Automatic control sequences.
CAUTION
Users and installers of this equipment should be aware
of all recommended safety procedures and information
such as AMCA publication 410-90-Safety Practices.
CAUTION
Never open an access door while air unit is in operation.
WARRANTY
NOTICE
For Warranty Support with the Frick AcuAir unit, contact
Frick Service at 717-762-2121.
CAUTION
A fan, even though locked out electrically, can rotate in
a seemingly insignificant air flow. During maintenance
the impeller should be secured to restrict rotation. Verify
that the restrictive device is removed before putting the
fan back into service.
CAUTION
Equipment wired to automatic control devices may start
without warning, resulting in personal injury or property
damage. In many instances, a unit will have multiple elec
-
trical connection points. To prevent unforeseen startup,
prior to beginning work on a hygienic air unit, always
lock out all power supplies.
CAUTION
Always replace any protective covers removed for ser
-
vicing.
CAUTION
Always replace bolts or locks on latches of access doors
that provide access to areas with moving parts. This
mechanical protection from moving parts is required by
UL 1995 (See Figure 1).
CAUTION
A number of additional safety issues are discussed
throughout the manual.
Please read the complete manual
prior to installing, operating, or servicing the equipment.
Summary of Contents for AcuAir
Page 54: ......
