Frico Infraduo IHD17, Assembly And Operating Instructions Manual

Infraduo IHD

4

GB  

voltage must be switched off to make sure 
that the wiring is dead! 

Only switch on the appliance when 

installation is complete. 

SWITCHING ON FOR THE FIRST TIME

• After switching on the appliance for the 

first time and following extended periods 
on non-use, the appliance may smell for a 
short time. 

CLEANING

• First, disconnect the equipment from the 

power supply system! 

• After the appliance has cooled down, the 

housing can be wiped dry. 

• Do not touch the quartz rods with your 

fingers, since stains could build up from 
such a contact. 

• The reflector should be cleaned regularly 
• Do not use any abrasive or caustic cleaning 

agents! 

• Never immerse the appliance in water! 

Danger to life! 

AFTER-SALES SERVICE

• All repairs must be referred to authorised 

personnel! Therefore, you should contact 
your specialized dealer or the customer 
service. 

  Important! Any tampering with the 

appliance will invalidate the warranty. 

• Repairs carried out improperly and by 

unqualified persons may have serious 
consequences for the user! 

TECHNICAL DATA

Rated voltage: 230 V/50 Hz 
Rated output: 1650+7W / 2000+7W
Dimensions (LxWxD): 82,5x9,5x12,5 cm 
Weight about: 3,35 kg
Protective system IP65