background image

Warranty & Specifications 

IMPORTANT NOTICE

We, the manufacturer, reserve the right to change the product and/

or specifications in this manual without notification. The manual is for 

information usage only and the pictures and drawings depicted herein are 

for reference only.

Warranty Repair and Service

Do not return this product to the store for warranty issues or repair. Call 

our customer service department at 

720-287-5182,  1-877-487-8275, 

 or 

visit

 

www.dirtyhandtools.com

 for the location of the nearest service center.

Record the information below for future reference.

Model No.
Serial No.
Date of Purchase
Place of Purchase

Specifications

 

SKU/Part No. 

103400 

104369

 Description 

Power Post Driver 

Power Post Driver

 Engine 

31cc DHT Engine* 

35cc Honda Engine*

    

EPA Approved 

EPA Approved

 Engine Type 

4-stroke, single cylinder 

4-stroke, single cylinder

 Engine Fuel Capacity 

20.29 fluid ounces (600mL) 

21.76 fluid ounces (643mL)

 Engine Oil Capacity** 

2.37 fluid ounces (70mL) 

3.4 fluid ounces (100mL)

 Dimensions 

23”L x 13”W x 14” D 

23”L x 13”W x 14” D

 Weight 

34 Lbs.  (Shipping Weight 45 Lbs.) 

34 Lbs.  (Shipping Weight 45 Lbs.)

 Warranty 

2 Year / 2 Year Limited Warranty 

2 Year / 2 Year Limited Warranty

*As rated by engine manufacturer

** Not included, shipped without engine oil

1100 W 120th Ave., Suite 600

Westminster, CO 80234 • 720-287-5182

Dirty Hand Tools® is a brand of

For Service or Questions

Call 1-877-487-8275

720-287-5182

www.dirtyhandtools.com

Summary of Contents for Dirty Hand Tools 103400





















Reviews: