Fig.
2
-
3
3 INSTALLATION SITE
WARNING
Be sure to adopt adequate measures to prevent the unit from being used as a shelter by small animals.
Small animals making contact with electrical parts can cause malfunction, smoke or fire. Please instruct the customer
to keep the area around the unit clean.
The equipment is not intended for use in a potentially explosive atmosphere.
Please connect the top pipe or fill the water tank immediately after removing the wooden frame, so as not to cause
the machine to tip over.
2.2
Remove the wooden base
Remove the 4 screws of the wooden base (Refer to Fig.2-3).
Two people hold the sheet metal
lifting machine, the other
s
pull the wooden base
(Refer to Fig.2-4)
.
Remove the 8 screws of the sheet metal
and remove the sheet metal
(Refer to Fig.2-
5
)
.
Take carefully when lifting machine and pull the wooden.
Care should be taken when transporting the heat pump unit that the casing is not damaged by impact. Do not remove the
protective
packaging unit heat pump unit has reached its final location. This will help protect the structure and control panel. The heat pump unit
can be transported ONLY vertically.
Be careful with the Installation and Operation manual and with the factory-supplied accessories box lacated at the top of the unit.
Three people are required when lifting because of the heavy weigh of the unit.
Fig.
2
-
5
0
9
Fig.
2
-
4
17
.5m
m
17
.5m
m
17
.5m
m
