Frigidaire 137147900 A, Installation Instructions Manual

- EXCESSIVE WEIGHT HAZARD -

To avoid 

back or other injury, have more than one person move or lift 
the washer.

3

C

1

) Attaching washer mounting hardware

WASHER INSTRUCTIONS

D

1

) Mounting washer

E) Installing or re-installing washer

Use the following instructions for mounting either of these types 

1. 

of washers to the pedestal:

Using two or more persons, slightly tip the washer back and lift it 

1. 

onto the pedestal. Still tipped, slide the washer back against the 
rear brackets and gently set down the front so the appliance is 
between the front and rear brackets.

Attach each front clip to outer-most set of holes with 2 screws 

2. 

and supplied spacer.

Insert “A” tab of each rear bracket into the middle slots on rear 

3. 

of pedestal. Orient bracket inward for washer mounting.

Adjust the appliance side-to-side to align its mounting holes with 

2. 

the pedestal’s bracket holes. 

Install 2 screws through each rear bracket into the base of the 

3. 

washer.

With the pedestal drawer open for better access, install a screw 

4. 

through each front bracket into the base of the washer.

Slide appliance/pedestal into place.

1. 

Check for levelness and rock all four (4) legs again. Repeat until 

2. 

level and solid.

Refer to 

3. 

Washer Installation Instructions

 for complete details 

on installing water, drain, or electrical.

SLIDE BACK

TIP DOWN

middle

slot

inward

Install 2 screws through each rear bracket into aligning pedestal 

4. 

holes.

Locate spacer under each front bracket.

“A”

tab