5
Adjustable Interior Shelves
Multi-position adjustable interior shelves can be moved to any
position for larger or smaller packages. The shipping spacers
that stabilize the shelves for shipping may be removed and
discarded.
Door storage
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can be
quickly selected.
Some models have door racks or bins that can accommodate
gallon-sized plastic drink containers and economy-sized jars
and containers.
The dairy compartment, which is warmer than the general food
storage section, is intended for short term storage of cheese,
spreads, or butter.
Adjustable door bins
Some models have adjustable door bins that can be moved to
suit individual needs.
To move door bins
1.
Lift bin straight up.
2.
Remove bin.
3.
Place bin in desired
position.
4.
Lower bin onto supports
until locked in place.
Crispers (some models)
The crispers, located under the
Crisper Drawer
bottom refrigerator shelf, are
designed for storing fruits,
vegetables, and other fresh
produce. Wash items in clear
water and remove excess
water before placing them in
the crispers. Items with strong
odors or high moisture content
should be wrapped before
storing.
Humidity Control (some models)
The Humidity Control, present on some models with crisper
drawers, allows you to adjust the humidity within the crisper.
This can extend the life of fresh vegetables that keep best in
high humidity.
Crisper
Humidity Control
NOTE
NOTE
NOTE
NOTE
NOTE
Leafy vegetables keep best
when stored with the
Humidity Control set on
High
Humidity
, or in a drawer
without a Humidity Control.
This keeps incoming air to a
minimum and maintains
maximum moisture content.
Care and Cleaning
•
Damp objects stick to cold metal surfaces. DO NOT touch
interior metal surfaces with wet or damp hands.
•
The freezer must be unplugged (to avoid electrical hazard)
from power source when defrosting the unit.
Convertible model is frost free and will defrost automatically, but
should be cleaned occasionally.
Cleaning The Inside
After defrosting, wash inside surfaces of the freezer with a solution
of two (2) tablespoons of baking soda in one (1) quart (1.136 liters)
warm water. Rinse and dry. Wring excess water out of the sponge
or cloth when cleaning in the area of the controls, or any electrical
parts.
Wash the removable parts with the baking soda solution mentioned
above, or mild detergent and warm water. Rinse and dry.
NEVER
use metallic scouring pads, brushes, abrasive cleaners or alkaline
solutions on any surface.
DO NOT
wash removable parts in a
dishwasher.
Cleaning The Outside
Wash the cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth. Replace parts and
food.
Do not use razor blades or other sharp instruments, which can
scratch the freezer surface when removing adhesive labels. Any
glue left from the tape can be removed with a mixture of warm water
and mild detergent, or touch the residue with the sticky side of the
tape already removed.
DO NOT REMOVE THE SERIAL PLATE
.
