Frigidaire 318200138 (0610), Instruction Manual

18

INSTRUCTIONS

PRESS

DISPLAY

Adjusting Oven Temperature

Fig. 1

Fig. 2

Fig. 3

Note:

 The oven

temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broil temperature .

The temperature in the oven has been preset at the factory. When first using the oven,
be sure to follow recipe times and temperatures. If you think the oven is too hot or too
cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by
using a temperature setting that is higher or lower than the recommended temperature.

The baking results should help you to decide how much of an adjustment is needed.

Bake

3

0

3

0

Clean

START

or

Clear

/Off

To adjust the oven temperature:

1.

Press and hold 

Bake

 for 6 seconds. The preset

adjustment number will appear and 

"UPPER"

 will flash

in the display (Fig. 1).

2.

To increase the temperature use the number pads to

enter the desired change.  (Example 30°F) 

3

0

(Fig. 2).  The temperature may be increased as much
as 35°F (19°C). To decrease the temperature use the
number pads to enter the desired change.  (Example -

30°F) 

3

0

  and then press 

Clean

 (Fig. 3).  The

temperature may be decreased  as much as 35°F
(19°C).

3.

Press 

START

 to accept the temperature change and the

display will return to the time of day. Press 

Clear

/Off

 to

reject the change if necessary.

NOTE:

 Each oven may be adjusted individually.

UPPER

ROAST

LOCKED

WARM

BAKE

DELAY

CONV

BROIL

TIMED

UPPER

TIMER

REMOVE

LOWER

DOOR

RACKS

CLEAN

CONV

BROIL

TIMED

WARM

BAKE

DELAY

LOWER

ROAST

LOCKED

UPPER

ROAST

LOCKED

WARM

BAKE

DELAY

CONV

BROIL

TIMED

UPPER

TIMER

REMOVE

LOWER

DOOR

RACKS

CLEAN

CONV

BROIL

TIMED

WARM

BAKE

DELAY

LOWER

ROAST

LOCKED

UPPER

ROAST

LOCKED

WARM

BAKE

DELAY

CONV

BROIL

TIMED

UPPER

TIMER

REMOVE

LOWER

DOOR

RACKS

CLEAN

CONV

BROIL

TIMED

WARM

BAKE

DELAY

LOWER

ROAST

LOCKED

To Set the Oven Control Back To The Factory Default Settings

This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour
Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or Normal
Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0).

1.

Press and hold 

7

 until the first single beep sounds (about 6 seconds)

2.

After the first beep, press  

START

 pad once. All the setting are now set to the original factory default.