6
Important Safety Instructions
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas range is designed to allow for conversion to
Liquefied Petroleum (L.P.) Gas.
If L.P. conversion is needed, contact the service center for
assistance. The L.P. Conversion Kit is provided with this range
and is located on the right panel (right side) of the range. Before
installing the kit be sure to follow the L.P. Installation Instructions
carefully.
Personal injury or death from electrical shock
may occur if the range is not installed by a qualified installer
or electrician.
Any additions, changes or conversions
required in order for this appliance to satisfactorily meet the
application needs must be made by an authorized Service
Center.
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
DO NOT
Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
electrician.
See the
INSTALLATION INSTRUCTIONS
packaged with this cooktop
for complete installation and grounding instructions.
Grounding Instructions
Avoid fire hazard or electrical shock.
DO NOT
use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord.
Failure to follow this warning can cause serious injury,
fire or death.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle.
DO NOT
cut or remove the
grounding prong from this plug.
Do not, under any
circumstances,
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Grounding type
wall receptacle
