18
SETTING OVEN CONTROLS
SETTING QUICK OR POWERPLUS
TM
PREHEAT
Use the preheat feature when using
single rack baking
to quickly heat the oven to bake temperatures. Use this
feature only for standard baking. A reminder tone will sound
indicating when to place the food in the oven.
When the oven is fi nished preheating quick preheat will
become just like the bake feature and continue to bake
until cancelled.
To set the Preheat temperature for 375°F
1. Arrange the interior oven racks.
2. Press
PREHEAT
. “
350
” will appear in the display. If a
preheat of 350°F is needed, press
START
.
3. Press
3 7 5
.
4. Press
START
. “
PRE
” will be displayed while the oven is
preheating.
NOTE
While in preheat mode, the convection fan will be activated
during the fi rst rise of temperature to allow the oven to
reach its target temperature faster. The Bake, Broil and
Convection elements will also cycle for a better heat
distribution.
SETTING BAKE
The
BAKE
pad controls normal baking. If a rapid preheating
is preferred, refer to the
POWERPLUS
TM
PREHEAT
feature
for instructions. The oven can be programmed to bake at
any temperature from 170°F to 550°F (77°C to 288°C).
Baking Tips:
• Preheat your oven before using the bake mode.
• During preheat, the 3 elements and the convection fan
are used in cycle to quickly heat the oven.
• Use only one rack and center the pans as much as
possible on rack 2 or 3.
• If using two racks, place the oven racks in positions 2
and 4.
• Allow 2” to 4” (5,1 to 10,2cm) around the utensil(s) for
proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
To set the Bake Temperature to 375°F
1. Arrange interior oven racks.
2. Press
BAKE
, “
350
”
will appear in the display. If a bake
of 350°F is needed, press
START
.
3. Press
3 7 5
.
4. Press
START
. The actual temperature will be displayed.
A beep will sound once the oven temperature reaches
375°F and the display will show “
375°
”.
5. Place food in the oven.
NOTE
During the fi rst rise of temperature, the convection fan
will be activated to allow the oven to reach its target
temperature faster. The Bake, Broil and Convection
elements will also cycle for a better heat distribution.
NOTE
Pressing
CANCEL
will stop the feature at any time.
To change the Bake Temperature (example:
changing from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to 425°F,
press
BAKE
and “
375
”
will appear in the display.
2. Press
4 2 5
.
3. Press
START
.