IMPORTANT
Make sure water line tubing goes
through hole at top of dispenser pocket.
There is also a metal wrap on the tubing
to prevent damage from the hinge rub-
bing against it. This needs to be fixed
back around the tube in the proper loca-
tion upon reinstallation (just as long as
the tube is protected from the hinge).
NOTE
When reinserting the water tube and
replacing the top hinge cover, use care
to be sure the tube does not kink.
11
DOOR REMOVAL
Lower Hinge Removal
Once both doors are in place, ensure they
are aligned with each other and level
(Reference the Installation section for
more details), and replace the top hinge
cover.
8. To reinstall doors, reverse procedure.
7. To gain access to lower hinge, drawer
will need to be extended. Unscrew the
three lower hinge screws and slide the
hinge inwards.
To remove the Custom-Flex
TM
Temp Drawer
1. Fully open
drawer.
2. Remove
basket from
drawer.
3. Unsnap the
4 cable ties
by pressing clip sides together and
pushing through opening.
4. Remove screw and retaining clip and
disconnect the harness
5. Remove drawer by pressing on the
liner clips and slide rail past clips on
both sides to fully remove drawer
from cabinet.
Press the two
tabs on both
sides to release
the sliders
Cable
Tie
Cable
Clip
NOTE: Do Not Remove or Cut
Cable Ties From Wire Harness
(4) Cable
Ties
Retaining
Clip
Retaining Clip
To Cabinet
Harness
Screw