background image

11

OPERATING INSTRUCTIONS

Cycle Settings

WASH WATER TEMPERATURE

Follow the fabric care label instructions 

on items to be washed.

For best results

To change the temperature, press the auto temp button 

to scroll to the desired setting. Select a wash water 

temperature according to fi ber content, colorfastness and 

soil level. A cold water rinse saves energy and reduces 

wrinkling.

To protect your fabrics, not all temperatures are available 

with every cycle. The indicator will not light if the setting 

is not available with that cycle.
The temperature selected for the cycle will be remembered 

and recalled each time that cycle is selected in the future.

Í

NOTE

To change the temperature once the cycle has begun, 

press the pause button, make the new selection and 

press START again.

Wash water temperatures are automatically regulated to 

maximize detergent effectiveness and improve washing 

performance. The water heater setting and its distance 

from the washer, water usage in other parts of the home, 

and seasonally low ground water temperature in some 

geographic areas can affect water temperature.

sanitize (on select models)

This setting sanitizes heavily soiled colorfast fabrics 

such as towels, bedding, and children’s clothing by 

killing 99.9% of bacteria using wash water heated with 

a boost heater to 152° F (67° C). Cold water is used to 

cool and rinse the load.

NSF Protocol P172

Sanitization Performance of Residential
and Commercial, Family-Sized Clothes
Washers

hot

Use this setting for heavily soiled white or colorfast 

cottons and blends.
warm

Use this setting for normally soiled white or colorfast 

cottons or blends.
cool (on select models)

Use this setting for normally soiled sheets, casual items 

and washable woolens.
cold

Some warm water will automatically blend with cold tap 

supply to achieve a precise cold. Use this setting for 

lightly soiled non-colorfast items, knits, delicates, and 

hand washables.
cold water clean

Wash and rinse temperatures are equivalent to 

temperature of cold tap supply. Use this selection for 

fabrics and colors that are prone to dye transfer. For 

use with cold water 

 detergents.

Í

NOTE

Only sanitizing cycles have been designed to meet the 

requirements of NSF P172 protocol for sanitization 

effi cacy.

SPIN SPEED
Max
highmedium and low spin speeds are available 

for each cycle. The spin speed and/or duration of fi nal 

spin vary from model to model and cycle to cycle.
Increasing the spin speed will extract more water, 

decrease drying time and conserve energy. Decreasing 

the spin speed will reduce wrinkling.
Select low spin speed to gently spin items that should be 

line dried.
Use no spin to omit the fi nal spin at the end of the 

cycle. The load will be very wet. Remove items from the 

wash drum to drip dry or select a rinse & spin cycle to 

remove excess water at a more convenient time.

SOIL LEVEL
Adjust the wash time in 3-minute increments based on 

the soil level of each load. Heavynormal, and light 

soil levels are available.

cancel

spin

speed

START

pause

soil

level

options

select

auto

temp

delay

start

To return to factory 

settings, press these 

two buttons at the 

same time and 

hold until the signal 

sounds.

Summary of Contents for Affinity FAFW3921NW





























Reviews: