background image

12

OPERATING INSTRUCTIONS

Drying Rack (on select models)

Use the drying rack for items which should not be tumble 

dried. Insert the rack into the dryer drum, resting the back 

support on the moisture sensor bars and the front legs on 

the air grill.
Place items to be dried on top of the rack, leaving space 

between items and not allowing them to hang over the 

sides or through the holes. The weight should not exceed 

10 lbs (4.5 kg). Select the air dry (no heat) setting for 

items containing plastic, foam rubber, rubber-like materials, 

feathers or down.
When items are dry, remove the rack and store it in a con-

venient location.

Other Features

Í

NOTE

For step-by-step instructions on DOOR REVERSAL, refer to 

the 

Installation Instructions supplied with this dryer.

Í

NOTE

If your model did not come supplied from the factory 

with a drying rack you may order one.

 Control Lock

To avoid having someone accidentally start or stop the dryer, 

press options and select at the same time and hold for 

10 seconds. If you attempt to activate the dryer while it is 

locked, the display will fl ash and error beeps will sound. To 

remove the control lock, press options and select again.
Estimated Time Remaining

The initial drying time will be displayed for about 5 minutes 

after the start of a cycle. Then in auto dry cycles, the out-

side of the display will light up in a circular track to indicate 

the estimated drying time is automatically being calculated 

by the sensors. Timed dry cycles continue with actual time 

remaining.
Status Lights

The following indicators may be lighted during the cycle:

• clean lint fi lter

• drying

• cool down

• wrinkle release

• done

Drum Light

The drum light will come on whenever the door is opened 

to illuminate the drum during loading and unloading. Clos-

ing the door turns off the light.
Reversible Door

Your dryer is equipped with a reversible door. The door can 

be hinged on the right or left side.

moisture sens-

ing bars

rear 

support

front 

legs

Press and hold both for ten seconds 

to lock or unlock the controls.

Summary of Contents for Affinity FAHE4044M W?




















Reviews: