What to do if..., continued
Consumption values
14
Only cold water loading
Programme
Water consumption
(in litres)
Energy consumption
(in kWh)
Programme
duration
Cotton/Deep Clean Sanitary
98
3.8
For the duration of the programmes,
please refer to the display
on the control panel
Cotton/Deep Clean 60°C
90
2.2
Cotton/Deep Clean 60° + Eco (*)
89
1.9
Cotton/Deep Clean 40°C
90
1.2
Synthetics 60°C
75
1.6
Synthetics 40°C
67
0.85
Delicates 40°C
75
0.8
Wool 40°C
75
0.7
Spinning starts late or the appliance does not spin:
The electronic unbalance detection device has cut in because the laundry is not evenly
distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This
may happen several times before the unbalance disappears and normal spinning can
resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the
appliance will not spin. In this case, redistribute the load manually and select the spin
programme.
• Redistribute the laundry.
No water is visible in the drum:
Appliances based on modern technology operate very economically using very little
water without affecting performance.
The drum light doesn’t work:
Please contact your local Service Centre.
The message «
PF
» is displayed:
A power supply break has probably occurred.
• Restart the appliance by pressing the button
8
.
Malfunction
Possible Cause / Solution
If you are unable to identify or solve the problem, contact our service centre.
Before telephoning, make a note of the model, serial number and purchase date of your appliance: the Service Centre will
require this information.
Information: The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the
quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
(*) The
«Cotton/Deep Clean 60°+ Eco»
with a load of 10 kg is the reference programme for the data entered in the energy label.
Technical data
Electrical connection
Information on the electrical connection is given on the rating plate on the in-
ner side of the appliance door
Water supply pressure
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Cotton
10 kg
Spin Speed
Maximum
1100 rpm
Summary of Contents for ATF705X
Page 18: ...18 Notes ...