14
SETTING OVEN CONTROLS
Timer Functions
This appliance is equipped with three timer options: minute
countdown timer, cook time (
dur
), and end time (
END
).
Display Indicators
•
A:
Duration and End time indicator
•
B:
Time display
•
C:
Timer active indicator
•
D:
Minute timer indicator
To set a timer function:
1.
For Duration (dur) and END (end), use the
oven temp
and
oven mode
knobs to set an oven function and
cooking temperature. (This is not necessary for
.)
2.
Press
timer on-off
until the desired function option
appears, indicated by the bell symbol,
dur
, or
END
, and
starts to flash.
3.
Press
or
to set the desired timer function. The
timer function activates, and the corresponding
indicator will appear in the display. For
End
and
dur
,
A
will also appear in the display.
4.
When the time ends, the function’s indicator on the
display will start flashing and an signal will sound for two
minutes. Press any button to stop the signal.
To cancel the timer function:
1.
Press
timer on-off
until the desired function option
appears.
2.
Press and hold
and
at the same time. The
timer function will go out after several seconds.
To change the acoustic signal:
1.
To hear the current signal, press and hold
.
2.
Repeatedly press
to change the signal.
3.
Release
. The last tone you heard will be the new
signal.
4.
Wait five seconds for the setting to be confirmed.
Table 2:
Timer Functions
Function
Application
Minute Timer (
)
Use to track your cooking times without interfering with the cooking process. The timer
may be set from a minimum time of 1 minute to a maximum of 23 hours and 59 minutes.
Cook Time Duration (
dur
)
Use to set the cooking time of the oven, from 1 minute to 10 hours.
End Time (
END
)
Use to program the oven when to stop cooking, from 1 minute to 10 hours.
Figure 12: Clock display functions
Duration and End time may be used at the same time if
you want the appliance to activate and deactivate auto-
matically. First, set Duration. Then, set End.
A
B
C
D
NOTE
With the Duration and End functions, the appliance will
stop cooking automatically.
When the appliance is disconnected from the outlet or
after a power outage, the signal tone will be set back to
the default tone.
IMPORTANT
NOTE
