Frigidaire CGEF3039RF Use & Care Manual Download

Page: 2 / 36

Thank you for choosing

Frigidaire

This Use & Care Guide is part of our commitment to

customer satisfaction and product quality throughout the

service life of your new appliance. We view your purchase

as the beginning of a relationship. To ensure our ability

to continue serving you, please use this page to record

important product information.

Need help??

Visit the Frigidaire web site at www.frigidaire.com

Before you call for service, there are a few things you can

do to help us serve your better.

Read this Use & Care manual.

It contains instructions to help you use and maintain your

range properly.

If you received a damaged range ...

immediately contact the dealer (or builder) that sold you

the range.

Save time and money.

Check the section titled “Before You Call”. This section

helps step you through some common problems that

might occur. If you do need service, help is only a phone

call away. A list of toll-free customer service numbers

are included in the back of this manual. Or call Frigidaire

Customer Services at

1-800-944-9044

PRODUCT RECORD AND REGISTRATION

Product Registration

Registering your product with Frigidaire enhances our

ability to serve you. You can register online at

www.

frigidaire.com

or by dropping your Product Registration

Card in the mail.

Product Registration ......................................................2

Important Safety Instructions ............................ 3-5

Features at a Glance ............................................... 6

Before Setting Oven Controls ...............................7-9

Removing, replacing & arranging the oven racks ..........7

Effortless™ Oven Rack system and assembly ...............8

Before Setting Surface Controls .........................9-10

Cookware material types ........................................... 10

Setting Surface Controls ..................................11-14

Setting a single radiant element ................................ 11

Setting a dual radiant element .................................. 12

Setting keep warm ................................................... 13

Home canning ......................................................... 14

Oven Controls Functions .......................................15

Setting Oven Controls ......................................16-26

Setting the clock ...................................................... 16

Changing between continuous bake or 6-Hour

Energy Saving features ............................................. 16

Setting 12 or 24 hour display modes .......................... 16

Changing oven temperature display (F° or C°) ........... 16

Setting a silent control panel ..................................... 17

Setting oven lockout ................................................. 17

Setting minute timer ................................................. 17

Add a minute feature ................................................ 17

Setting quick preheat ............................................... 18

Setting bake ............................................................ 18

Setting bake time ..................................................... 18

Setting delayed timed bake ....................................... 19

Setting convect bake ................................................ 20

Setting convect roast ................................................ 20

Setting convect broil (some models) .......................... 21

Setting convect convert ............................................ 21

Broil ........................................................................ 22

Setting pizza feature ................................................. 23

Setting chicken nuggets feature ................................ 23

Setting keep warm ................................................... 23

Adjusting oven temperature ...................................... 24

Operating oven light ................................................. 24

Setting the Sabbath mode feature ........................ 25-26

Self-Cleaning ....................................................27-28

Care & Cleaning ................................................29-32

Cleaning recommendations table ............................... 29

Cooktop maintenance and cleaning ...................... 30-31

Replacing the oven light ........................................... 31

Removing & replacing oven door ............................... 32

Before You Call

- Solutions to common problems ..

33-34

Notes .....................................................................35

Appliance Warranty ...............................................36

Contents

Serial plate
location

Purchase date

Model number

Serial number

Record model & serial numbers here

Serial plate location:

open storage drawer (some models) or

remove lower front panel (some models).

Summary of Contents for CGEF3039RF





































Search results

Summary of Contents for CGEF3039RF

Reviews:

Related manuals for CGEF3039RF

Brands by name

Popular brands

Frigidaire CGEF3039RF, Use & Care Manual

Search results

Summary of Contents for CGEF3039RF

Reviews:

Related manuals for CGEF3039RF

Brands by name

Popular brands