33
OVEN CONTROLS
Adjusting Oven Temperature
The temperature in the oven is preset at the factory. When
first using the oven, be sure to follow recipe times and
temperatures. If you think the oven is cooking too hot or too
cool for the temperature you select, you can adjust the
actual oven temperature to be more or less than what is
displayed. Before adjusting, test a recipe by using a
temperature setting higher or lower than the recommended
temperature. The baking results should help you to decide
how much of an adjustment is needed.
To adjust the oven temperature higher:
1.
Press and hold
bake
for 6 seconds.
UPO 0
will appear
in the display.
2.
To increase the temperature, use the number keys to
enter the desired change. For example, for 30°F, press
3 0
. The temperature may be increased as much as
35°F (19°C).
3.
Press
start
to accept the temperature change and the
display will return to the time of day. Press
off
to reject
the change if necessary.
To adjust the oven temperature lower:
1.
Press
bake
for 6 seconds.
UPO 0
will appear in the
display.
2.
To decrease the temperature, use the number keys to
enter the desired change (Example -30°F)
3 0.
Then,
press
self clean
. The temperature may be decreased
as much as 35°F (19°C).
3.
Press
start
to accept the temperature change and the
display will return to the time of day. Press
off
to reject
the change if necessary.
Restoring Factory Default Setting
Your appliance is programmed with default control settings.
Over time, users may make changes to these settings. The
following options have settings that can be modified and
may have been changed since the appliance was new:
•
12 or 24 hour display mode
•
Continuous bake or 12 hour energy savings mode
•
Silent or audible control
•
Oven temperature display (F or C)
•
Oven temperature adjustments (offsets)
•
Stored recipes
•
Cancel or continue cooking with meat probe option
To restore oven control to factory default settings:
1.
When the oven is in idle and no cooking function is in
operation, press and hold the
7
key until the acceptance
tone sounds (about 6 seconds).
2.
Press
start
. The control is now reset to default settings.
Oven temperature adjustments made with this feature
will not change the broil or self clean cycle temperatures.
The oven temperature adjustments are permanent and
will stay in the unit memory unless manually changed or
if all the controls are reset. Even a power outage will not
reset these changes. Follow the same procedure again if
you wish to change it to a different setting or use these
instructions to restore default settings.
Do not use oven thermometers like those found in
grocery stores to check the temperature settings inside
the oven. They may display readings that vary greatly
from the actual temperature.
NOTE
If you choose to restore factory default settings, all of the
above user preferences will be restored to their original
settings (factory default). The oven temperature adjust-
ment will reset and any stored recipes will be cleared.
NOTE
