1. Clean the inner liner, ice collecting tray, water box, ice shovel and
evaporator frequently. When cleaning, unplug the unit and remove
the ice cubes. Use a diluted solution of water and vinegar to clean
the inside and the outside surface of the Ice maker. Do not spray Ice
maker with chemicals or diluted agents such as acids, gasoline or oil.
Rinse thoroughly before starting.
2. Keep ventilation openings in the appliance enclosure, or in the built-
in structure, clear of obstruction. Do not use mechanical devices or
other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
3. Reuse the machine after being idled for a period of time, it may not
have enough water to pump for air retard, in this case, the water
shortage indicator "ADD WATER" will light up, repress power button
to restart the ice maker is okay.
4. To ensure the cleanness of ice, please change water for water
reservoir at least once one day. If do not use for a long time, please
drain the water out and clean it up.
5. If the compressor takes a strike action for shortage water, fully water
or interruption of power supply, it will delay for 3 mins to start up
after restarted.
6. Always use fresh water before starting ice production either at initial
installation or after a long shut-off period.
9
CLEANING AND MAINTENANCE
