background image

5

Auto-Off

as a safety feature, the auto-off function will turn off the heat to 

the soleplate if the iron is not moved within a certain amount of 

time.  if the iron is placed on the soleplate or either side without 

movement, then the heat will turn off after 30 seconds.  if the 

iron is placed on the heel rest without movement, then the heat 

will turn off after 15 minutes.  the power indicator will flash to 

indicate that the iron has entered into the auto-off mode and that 

no heat is being supplied to the soleplate.  to resume use of the 

iron after it has entered into the auto-off mode, initiate movement 

of the iron.  depending on how long the iron has been in the auto-

off mode, you may need to allow it to heat back up.  the Ready 

indicator will illuminate when the iron has heated back up to the 

previously set fabric selection.  if the iron is left in the auto-off 

mode, it will shut off completely after 5 minutes of entering the 

auto-off mode.

Non-Drip System

the iron is capable of generating steam, even at reduced 

temperatures, without water drips, sputters, or leaks coming 

through the soleplate steam holes.

vertical Steam

the iron is capable of being used as a garment steamer using the 

steam burst/Vertical steam button.

Anti-Calcium System

the iron contains an anti-calcium system that reduces calcium 

accumulation on the soleplate by removing calcium from the water 

inside the reservoir.

WARNING

The Auto-Off function is designed as a safety feature 

and should not be used as the primary method of 

turning off the iron.  The “Using Your Iron” section 

contains information on properly turning off the iron. 

Summary of Contents for fafi16d7Ma











Reviews: