11
INSTALLED DIMENSIONS
* To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90° elbow (right) adds approximately 0.75 in. (2 cm) to installation depth. Upward venting of exhaust on stacked
dryer adds approximately 4 in. (10.2 cm) to installation depth. Downward venting of exhaust on stacked dryer adds approximately 2.25 in. (6.5 cm) to installation depth. Leftward venting of exhaust on stacked dryer
adds approximately 3.75 in. (9.5 cm) to installation depth.
1
Hot and cold inlet hose length approximately 43 inches (109cm)
2
Power supply cord length approximately 60 inches (152.5cm).
3
Drain hose length approximately 52 inches (132cm).
51.4” (131cm)
to clear open door
30.3” (77cm)*
to front of closed door
71.5”
(182cm)
37”
(94cm)
39”
(99cm)
27.0”
(68.5cm)
electrical
supply on
rear of unit
gas supply
pipe on rear
of gas unit
water supply
connection on
rear of unit
1
centerline
height for
rear vent
drain hose on
rear of unit
3
power cord on
rear of unit
2
electrical
supply on
rear of unit
centerline
height for
rear vent
* To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90°
elbow (right or down on freestanding dryer) adds approximately 0.75 in. (2.0 cm) to installation depth.
Upward venting of exhaust on pedestal-mounted or freestanding dryer adds approximately 4 in. (10.2 cm) to
installation depth. Leftward venting on pedestal-mounted or freestanding dryer adds approximately 3.75 in.
(9.5 cm) to installation depth. Downward venting of exhaust on pedestal-mounted dryer adds approximately
2.25 in. (5.7 cm) to installation depth.
51.4” (131cm)
to clear open door
30.3” (77cm)*
to front of closed door
freestand dryer
on fl oor
dryer mounted on
optional pedestal
fl oor line
fl oor line
36.0”
(91.5cm)
51.25”
(130cm)
27.0”
(68.5cm)
3.7”
(9.5cm)
19.0”
(48cm)
13.50”
(34.5cm)
to center of rear vent
3.75”
(9.5cm)
16.9”
(43cm)
1.6”
(4cm)
gas supply
pipe on rear
of gas unit
