8
30” ELECTRIC FRONT CONTROL FREESTANDING INSTALLATION INSTRUCTIONS
Care, Cleaning and
Maintenance
Refer to the
Use & Care Manual for cleaning instructions.
If removing the range is necessary for cleaning or
maintenance, disconnect the electrical power supply. If
the electrical supply is inaccessible, lift the unit slightly at
the front and pull out away from the wall. Pull only as far
as necessary to disconnect the electrical supply. Finish
removing the unit for servicing and cleaning.
Before You Call for Service
Read the "Before You Call" and operating instruction
sections in your
Use & Care Manual. It may save you time
and expense. The list includes common occurrences that
are not the result of defective workmanship or materials in
this appliance.
Refer to the warranty in your
Use & Care Manual
for our
toll-free service number and address. Please call or write
if you have inquiries about your range product and/or need
to order parts.
Model and Serial Number
Location
The serial plate is located on the front of the appliance, visible
when the door is opened.
When ordering parts for or making inquires about your
range, always be sure to include the model and serial
numbers and a lot number or letter from the serial plate on
your range.
Your serial plate also tells you the Kilowatt rating (power
requirements) and Voltage ratings.
Fig. 18
7. Carefully Slide Range Into
Final Location
Be sure to provide all the adequate clearances and
dimensions before moving appliance into final location.
Carefully slide range into final position while inserting rear
leveling leg into the anti-tip bracket. Make sure the power
cord folds into the remaining open floor area behind the
range. Be sure to check the level of the range.
