background image

16

SETTING OVEN CONTROLS

Setting the Clock

The clock icon is used to access the time of day setting. 
When the oven is first plugged in or if there has been an 
interruption in power to the range, 

12:00 

will flash in the 

display. 

To set the correct time of day:

1.

Press the clock icon.

2.

The display will show a time along with a 

– 

and a 

key

 

in the display below.

3.

Press either 

 

or 

+

 key to scroll to the correct time of 

day and release the key.

4.

The control will accept the new set time with a chime, 
and the control will show the time of day along with the 
two timers that are available.

Oven Light

The oven light will turn on automatically when the oven door 
is opened. The oven light may be turned on when the door 
is closed by using the oven light key located on the control 
panel. 

Note:  

Keep oven light off while baking. The oven light will 

turn off during a clean cycle and not operate. 

To toggle the oven lights on and off:

1. Press oven light symbol 

.

The interior oven light is covered with a glass shield. The 
glass shield must be in place whenever the oven is in use.

To change the interior oven lights, see “

“Replacing the Oven 

Light” 

in the Care & Cleaning section.

Setting the Timer

The two minute timers in the oven display serve as extra 
timers to help keep track of cooking functions. The timer 
cannot be used during a self clean cycle or if the meat 
probe function associated with the timer display is in use. 
The minimum timer setting is 1 minute and the maximum 
setting is 11:59 (HR:MIN).

To set the timer:

1.

Press either 

TIMER

 key.

2.

The timer display will show 

0:00

 and the 

 and 

keys 

on either side of the time display. NOTE: If the

 – 

key is 

pressed at this time an invalid key chime will sound. 

3.

Press the

 +

 key to begin to scroll to the desired setting. 

If the 

key is held, the timer value will increase rapidly. 

Once the desired setting is reached, release the key 
and the timer will start counting down automatically after 
a short time-out.

4.

The timer display will show the 

H:M

 icon if the timer is 

set for more than 1 minute. If the value is under 1 
minute, the timer will display the time in seconds and 
the 

H:M

 icon will not appear.

5.

When the timer ends, a reminder chime will sound and 
repeat once every 60 seconds for a period of five 
minutes. Before the user can program an expired timer 
again, the timer key must be pressed.

6.

To cancel the timer before the set time expires, press 
the 

TIMER

 key.

 

The clock cannot be changed when the oven is set for 
cooking or self clean is active. Only a 12 hour clock is 
available on the Frigidaire Professional model.

NOTE

The minute timers will not start or stop the cooking 
process. The minute timers can be used alone or while 
using most of the other oven features. 

NOTE

Summary of Contents for FCRC3012AB









































Reviews: