10
CLEANING AND MAINTENANCE ATTENTION
MAINTENANCE
Do not use chemical detergents
when cleaning.
Please unplug the power cord,
otherwise it may cause electric
shock.
•
When there is accumulated dust
on the surface, please wipe it with
a soft cloth and water mixed with
neutral detergent and let it dry in
the air.
•
Avoid using any substances that
may damage the outer surface.
Cleaning of the body surface
1.
The cleaning of machine body
surface shall be wiped with a wet
cloth. Avoid washing it directly
with water.
2.
Do not use corrosive detergent or
solvent for cleaning.
3.
When cleaning the body, turn off
the unit and unplug the power
cord, to prevent an electric shock
hazard.
Product maintenance
1.
When the unit is not used for a
long time, unplug the power, pack
the unit and prevent dust from
entering.
2.
Before packaging, ensure that the
cooling pad and dust-proof filter
are dry, and no water in the water
tank.
Product storage
When the product is not used for a
long time, pull out the water plug at
the bottom of the water tank to drain
the water in the tank, and re-tighten
the water plug. Dry the cooling pad
through normal wind, unplug the
power cord, wrap the machine to
prevent dust from entering, and store
it in a dry and ventilated place.
