background image

13

To Set the Automatic Timer (Timed Bake Feature)

BAKE TIME

 and

 STOP TIME 

control the Time Bake operation. The automatic

timer will turn the oven on and off at the times you select in advance. The oven

can be programmed to start immediately and shut off automatically or to

begin baking at a later time with an automatic shutoff.

To  Program  the  Oven  to  Begin  Baking  Immediately  and  To  Shut  Off

Automatically:

1. Be sure that the clock shows the correct time of day.

2. Place the food in the oven.

3. Push 

"— —:— —" and the words "BAKE TIME" will glow in the display

window.

4. Push and hold

 or

 

until the desired baking time appears in the

display. The baking time can be set for any amount of time from 5 minutes

to 11 hours and 59 minutes. When setting the baking time, the time will

appear in the display and increase in 5 minute increments.

5. Push

 or 

.

 "— — —°" and the word "BAKE" will glow in the display.

6. Push and hold

 or

 

until the desired baking temperature appears

in the display.

Once the Controls are Set:

a. The oven will come on and begin heating to the selected baking temperature.

b. The words "BAKE" and "ON" will appear in the display.

c. The main display will show the oven baking time and will count down by

minutes until it reaches ":00."

When the Set BAKE TIME Runs Out:

a. ":00"  will  appear  in  the  display  window  and  the  oven  will  shut  off

automatically.

b. The control will beep 3 times.

c. The control will then continue to beep once every 10 seconds for 5 minutes

or until

 is pushed.

 Use caution when using

the automatic timer. Use the automatic

timer  when  cooking  cured  or  frozen

meats and most fruits and vegetables.

Foods that can easily spoil such as milk,

eggs, fish, meat or poultry, should be

chilled  in  the  refrigerator  first.  Even

when chilled, they should not stand in

the oven for more than 1 hour before

cooking begins, and should be removed

promptly when cooking is completed.

Setting Oven Controls

Summary of Contents for FEF389WJCC

























Reviews: