Frigidaire FFB106M1PB, Instruction Manual

1.  Remove all accessories and 

shipping materials packed inside 
the Oven.

2.  Wash the Rack and Pan in warm 

soapy water. Wipe the inside of 
the Oven with a damp cloth or 
sponge. Blot dry with paper 
towels to be sure the unit is dry 
before using. 

3.  Place Oven on a flat counter or 

other stable surface DO NOT 
OPERATE ON THE SAME 
CIRCUIT WITH ANOTHER 
APPLIANCE.

4.  Position the Oven so that it is at 

least 2 inch (5cm) from any 
surrounding object. Ensure that 
nothing has been placed on top of 
the Oven.

5.  Make sure the Crumb Tray is 

properly installed before using.

For the first time only, turn the 
temperature knob to 480ºF and 
the timer knob to 15 minutes. This 
will burn off any oils still on the 
Oven. 

Before first use

The oven may smoke during this 
process. This is normal for a new 
oven and will not last more than 10-15 
minutes.

How to use

1.  Toasting

     Rotate the temperature knob 

clockwise to maximun position 
(480ºF)

     Open the oven door and place the 

bread slice on the baking rack. 
Place 1 slice of bread in the center 
of baking rack or 4 slices side by 
side.

     Note

: There is a starting angle for 

the thermostat with degree from 
45º-75º, when turning the 
Temperature knob clockwise 
within this degree, the power is cut 
at all events. If exceeds, the power 
supply can be get through after 
you setting the cooking time.

2.  Time Setting

     Choose your crust preference by 

adjusting the timer knob clockwise 
to select toasting time. To test the 
toasting of your type of bread, we 
suggest starting at short time, as 
bread varies according to 
humidity, thickness and texture, 
each type of bread will toast 
differently according to these 
properties.

     Note: When setting the timer knob 

for less than 5 minutes, always 
rotate timer to over 5 minutes and 
then rotate back to your chosen 
time. This will ensure a safe and 
accurate timer setting.

     When the toast cycle is finished 

the bell will ring and the electrical 

Important

off

380

300

°F

480

150

15

10

off

min

on

5

7

8

E

N

G

E

N

G