7
TEMPERATURE CONTROLS
Cool Down Period
For best performance, allow 4 hours for the wine/beverage cooler to cool down completely. The wine/beverage cooler
will run continuously for the first several hours.
Temperature Control
Adjustable Interior Shelves
Multi-position adjustable interior shelves can be moved to
any position for larger or smaller packages. The shipping
spacers that stabilize the shelves for shipping should be
removed and discarded. The Beverage Cooler comes
equipped with three glass shelves.
Interior Light (Some models)
The light comes on automatically when the door is
opened. The light can also be turned on and off by
FEATURES
:
Temperature display
Temperature display
Light: This button turns the light ON and OFF.
Power: This buttons turns the power ON and OFF.
Press both Light and Power buttons at the same time to change between Fahrenheit and Celsius temperatures.
The default temperature for the beverage cooler is 41°F (5°C). The temperature after power failure will be the
•
temperature set before the power failure.
To prolong the life of compressor, please wait for at least 5 minutes before the unit is restarted after power failure.
•
Failure display
If “E” and “F” are displayed, please contact local service personnel for repair.
•
If the temperature in the cooler is too low, it will display “L”.
•
If the temperature in the cooler is too high, the screen will display “H” and will flash. Under this state, the buzzer
•
will buzz for 30 seconds. One minute later, the buzzer will continue to buzz for the next 30 seconds. After three
times, the alarm will not buzz any more. You can press any key to cancel sound alarm.
Storing too many cans or bottles in the cooler may cause the temperature in the cooler to rise temporarily.
•
Press this button once to increase temperature 1° F/C.
Press this button once to decrease temperature 1° F/C.
pressing the “Light” button on the control panel. Press
the button twice to keep the light on when the door is
closed.
Door Lock
This unit is equipped with a lock near the bottom of the
door. Two keys are provided. Keep the keys out of reach
of children.
1. The beverage cooler can be operated by adjusting the temperature control buttons (up arrow and down arrow)
to the various settings.
2. The new desired temperature will flash on the display for a few seconds and then switch back to the actual
temperature which will gradually change until setpoint is reached.
The temperature range MIN and MAX is 33° - 50°F (1° - 10°C).
