10
Manual Operation
Setting the timer
Example: setting timer for 5 minutes
1. Press
Timer On-Off
pad once.
2. Enter desired time using number pads.
(timer may be set up to 99 minutes and
99 seconds).
3. Press
Timer On-Off
pad.
When finished, you will hear a series of beeps.
NOTE :
Timer count down does not stop even if the door is
open. To cancel the timer, press Timer On-Off pad once again.
Heating with high power level
Example: to heat for 5 minutes and 30 seconds at 100%
power:
1. Use the number pads to enter desired
heating time (cook time may be set up to
99 minutes and 99 seconds).
NOTE:
For time sets that start with numbers 1 - 6, the
remaining numbers must be entered within 2
second from the first pad press, otherwise the
Easy Set time will be used.
2. Press
START
pad.
When finished, you will hear a series of beeps
Heating with lower power levels
Using the highest power level to heat foods does not
always give the best results when some types of food need
slower cooking, such as roasts, baked goods or custards.
Your oven has nine other power levels you may choose.
Example: to heat for 4 minutes and 30 seconds at 70%
power:
1. Use the number pads to enter desired
heating time (cook time may be set up to
99 minutes and 99 seconds).
NOTE:
For time sets that start with numbers 1 - 6, the
remaining numbers must be entered within 2
second from the first pad press, otherwise the Easy
Set time will be used.
2. Press
Power Level
pad 4 times more (70 %
power).
P-70
appears in the display
3. Press
START
pad.
When finished, you will hear a series of beeps.
Safety Lock
You may lock the control panel to prevent the microwave
from being accidentally started or used by children.
The safety lock feature is very useful when cleaning the
control panel. The lock will prevent accidental programming
when wiping the control panel.
Example: to set the safety lock ON:
Press and hold the Safety Lock pad for more
than 3 seconds. The lock chevron will appear
in the display window with 1 beep.
Example: to change the safety lock from ON to OFF
Press and hold the Safety Lock pad for more
than 3 seconds. The lock chevron will disappear
in the display window with 1 beep.
Microwave heating or cooking may be quickly set at 100%
power level for 1, 2, 3, 4, 5 or 6 minutes. Use the number
pads 1, 2, 3, 4, 5 or 6 to choose the desired minutes of cook
time (this option will only work using the 1, 2, 3, 4, 5 or 6
numeric pads.)
Example: to quickly heat for 2 minutes at 100% power:
Press number pad for desired minute(s). The
microwave will start after 2 second delay.
NOTE:
"Food" will be displayed if a Easy Set cooking cycle
or press +30 sec or +10 Sec pad is not selected within 5
minutes of placing food in the microwave. You must open
then close the door again to clear ''Food" from the display.
Using Easy Set
hold for 3
seconds
hold for 3
seconds