22
SETTING OVEN CONTROLS
Setting Bake
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 288°C). The factory preset
automatic bake temperature is 350°F (177°C).
Baking Tips
For best bake results:
•
Fully preheat the oven before baking.
•
For best results when baking cakes using two oven
racks, place racks in positions 1 and 3 (See
•
When baking using two oven racks, position cookware
as shown in
•
Allow at least 2 inches (5 cm) of space between
cookware for proper air circulation..
To set Bake:
1.
Press
Bake
.
— — —
appears in the display.
2.
Within 5 seconds, press
or
. The display
will show
350°F
(177°C). The temperature can then be
adjusted in 5°F (1°C) increments.
3.
When a key is released, the oven will begin heating to
the selected temperature. When the oven reaches the
set temperature, the preheat indicator light will turn off
and the control will beep three times.
4.
To cancel the baking function, press
OFF
.
To change oven temperature after Bake has started:
1.
Press
Bake
.
2.
Press
or
to increase or decrease to a new
temperature. The oven indicator light on the electronic
display will turn on and off when using the bake feature
and during preheat. This is normal and indicates that
the oven is cycling to maintain the selected baking
temperature. To cancel baking press
OFF.
Figure 11: Pan positions two rack baking
Figure 12: Rack positions
1
2
3
5
4
Summary of Contents for FFED3026TSA
Page 39: ......