Frigidaire FFEF3015LM, Use & Care Manual

11

OVEN CONTROL FUNCTIONS

Changing temperature display (°F or °C) 

The electronic oven control is set to display °F (Fahrenheit) 

when shipped from the factory. The display may be 

changed to show either Fahrenheit or Celsius oven 

temperatures.

READ  THE  INSTRUCTIONS  CAREFULLY  BEFORE  USING  THE  OVEN.

For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.

Up and down arrow pads

— Use to adjust 

the oven temperature, clean time and when 

adjusting the clock or minute timer. Also used 

with many feature or function pads to make 

adjustments.

Bake pad

—Use to select 

the bake feature.

Feature indicator 

lights

— These indicator 

lights show which 

feature is active.

Clock pad

— Use to 

set the time of day.

Timer on-off pad

— 

Use to set or cancel 

the minute timer. The 

minute timer does not 

start or stop cooking.  

Timer on-off 

pad 

is used to set the 

continuous bake 

function.

Setting the clock

When the appliance is first plugged in or when the 

power supply to the appliance has been interrupted, the 

display will flash “12:00”. It is recommended to always 

set the clock for the correct time of day before using the 

appliance.

To set the clock:

1. Press 

clock 

once (do not hold key pad down). 

2.  Within 5 seconds, press and hold the 

 or 

until 

the correct time of day appears in the display.

SETTING OVEN CONTROLS

The clock cannot be changed when the oven is set for 

cooking

 or 

clean

 is active.

NOTE

To change the temperature to display °C (Celsius) 

or from °C to °F:

1. Press 

broil

. “— —” appears in the display.

2.  Press and hold the 

 until “HI” appears in the 

display.

3.  Press and hold 

 broil

 until °F or °C appears in the 

display.

4.  Press the

 or

 to change °F to °C or °C to °F.

5.  Press any control pad to return to normal operating 

mode.

The temperature display feature cannot be changed 

when the oven is set for 

cooking

 or 

clean

 is active.

NOTE

Oven, preheat & door locked lights 

— The 

“oven”

 light 

will glow each time the oven turns on to maintain the set oven 

temperature. The 

“preheat”

 light will glow when the oven is first 

set to operate, or if the desired temperature is reset higher than the 

actual oven temperature. The 

“door locked” 

light will flash when 

the oven door locks and unlocks, the oven door lockout is active or 

when the self-clean cycle feature is active.

Broil pad

— Use to 

select the variable 

broil feature.

Clean pad

— Use 

to set a Self-Clean 

cycle.

Clear off pad

— Use to 

clear any feature previously 

entered except the time 

of day and minute timer. 

Press 

clear off 

to stop 

cooking.

Also use 

clear off

 to 

activate oven lockout 

feature.